Primitive Technology: Mud Bricks
Primitive Technology: Mud Bricks
(Turn on subtitles [CC] in the lower right corner for more data while seeing.)
I influenced a block to form that makes blocks 25 x 12.5 x 7.5 cm from wood. A log was part and mortise and join joints were cut utilizing a stone etch and sharp shakes. The shape was lashed together with stick to keep it from falling to pieces when utilized.
Next, I made a blend of mud and palm fiber to make the blocks. This was then set into the form to be molded and taken to a drying zone. 140 blocks were made.
كبي
Whenever dry, the blocks were then collected into an oven. 32 rooftop tiles were then made of mud and let go in the furnace. It just took 3 hours to flame the tiles adequately. The mud blocks and tiles were somewhat weaker than objects produced using my normal mud source in view of the sediment, sand and rock substance of the dirt. Along these lines, I will take a gander at refining mud into dirt in future ventures rather than simply utilizing mud.
Curiously, the oven got sufficiently hot with the goal that iron oxide containing stones started to soften out of the tiles. This is not metallic iron, but rather just slag (press oxide and silica) and the temperature was most likely not high, but rather sufficiently just to gradually liquefy or mellow the stones when warmed for 3 hours.
The oven executed and additionally the solid ones I've worked in the past and has a decent volume. It can likewise be brought down and transported to different zones. In any case, the blocks are extremely fragile and next time I'd utilize better mud without sand/residue, and utilize grog rather than temper made of plant fiber which wears out in terminating. The shape works attractively. I expect to improve quality blocks for use in heaters and structures in future.
I influenced a block to form that makes blocks 25 x 12.5 x 7.5 cm from wood. A log was part and mortise and join joints were cut utilizing a stone etch and sharp shakes. The shape was lashed together with stick to keep it from falling to pieces when utilized.
Next, I made a blend of mud and palm fiber to make the blocks. This was then set into the form to be molded and taken to a drying zone. 140 blocks were made.
كبي
Whenever dry, the blocks were then collected into an oven. 32 rooftop tiles were then made of mud and let go in the furnace. It just took 3 hours to flame the tiles adequately. The mud blocks and tiles were somewhat weaker than objects produced using my normal mud source in view of the sediment, sand and rock substance of the dirt. Along these lines, I will take a gander at refining mud into dirt in future ventures rather than simply utilizing mud.
Curiously, the oven got sufficiently hot with the goal that iron oxide containing stones started to soften out of the tiles. This is not metallic iron, but rather just slag (press oxide and silica) and the temperature was most likely not high, but rather sufficiently just to gradually liquefy or mellow the stones when warmed for 3 hours.
The oven executed and additionally the solid ones I've worked in the past and has a decent volume. It can likewise be brought down and transported to different zones. In any case, the blocks are extremely fragile and next time I'd utilize better mud without sand/residue, and utilize grog rather than temper made of plant fiber which wears out in terminating. The shape works attractively. I expect to improve quality blocks for use in heaters and structures in future.
تعليقات
إرسال تعليق